Thrifty Kitchen Transformation-DIY Series-Painting & Glazing
By countrydesignhome on June 26, 2014
As you recall, part one of this series was the cleaning and priming of the cabinets: doors, drawers and boxes. Since the wood was so dark. each required 2 coats of primer and 2 coats of paint. The paint we chose was a Benjamin Moore Eggshell in a custom color called Design Studio White-very soft and creamy white, but not ecru.
Since the appliances are bright white, the cabinet color needed to be just the right shade of white. Since we wanted the cabinets to appear somewhat aged and glazed, a pure white would have been too stark. However, choosing a beige or a white that was too creamy would have highlighted the difference between the cabinets and the appliances. Here are the painted doors all lined up and ready for glazing! I chose the eggshell finish because I knew I would be finishing the doors with some sore of glazing or waxing, and the matte finish is more porous which may have resulted in too much glaze being absorbed into the paint
The same decision went into the glazing process. Initially my mom wanted to just keep the cabinets white, but I convinced her that glazing them would highlight the door detail that was completely hidden when they were dark oak with the white panel.
Glazing them with a faintly tinted glaze highlights the edges and moldings and creates a nice antique look without darkening the cabinets too much.In this case, I used Martha Stewart Antique Effect Glaze.
I found these in a mark-down bin at Michaels awhile ago and they were so cheap I grabbed a bunch of them! I figured this was the perfect glaze for the cabinets, because it allows you to tint the color and then use as little or as much as you like to create the perfect glaze. I poured all of the little bottles, plus my colors into one large mason jar, ensuring I had enough for the entire kitchen.
For the tint color, we decided on a very light combination of the wall paint, which is a Benjamin Moore Whitestone and some Rustoelum Java Brown Cabinet Glaze I had left over from another project. 1 teaspoon of each went into the quart jar of glaze. You know that old adage, “measure twice, cut once’? Well, that applies to mixing colors as well! I had to know the exact formula, in the event that something catastrophic happened to my jar of mixed glaze so that I could replicate it if need be. (Sooo, remember the time when I was testing out my new paint in the hall and I got distracted and dropped the whole can? No? You can read about that here: The Hall of Shame-Color-Splash!)
So the formula for this jar of glaze is: 1 quart of glaze + 1 teaspoon of Rustoleum Java Brown
Applying the glaze is simple. You simply paint the glaze onto the entire piece, using a foam brush. If you are planning on doing both sides of the cabinet doors, you have to allow each side to dry and cure (approx. 24 hours, depending on the humidity) so they don’t stick to the work surface once you flip them over.
The more you leave, the darker the piece. Conversely, the more you remove, the lighter the piece. Once I went over it with the rag, I allowed it to sit for a couple of minutes, allowing the glaze to settle into the corners. Then I wiped away any excess I didn’t want. The final look: a soft white with just a hint of darker glaze in the corners and moldings.
More Like This
Recent Posts by countrydesignhome
Most Popular on BlogHer
Lean Cuisine believes that women should be valued for their accomplishments as opposed to their weight/appearance. Lean Cuisine's new brand campaign Feed Your PhenomenalTM reflects its new brand purpose: to feed the greatness in every woman. Check out our bloggers' posts and see how they measure their true worth plus learn how you could win a $100. Read more
Most Popular on Home & Garden
Recent Comments on Home & Garden